Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for Los Angeles Homeowners
A gate that won’t open, grinds when it moves, or sags against its hinges isn’t a chore to put off. It’s how you get in and out of your property, and when it stops working, everything else stops too. Portcullis Gate Repair Los Angeles has handled residential and automatic gate repair across the city since 2008. Our technicians arrive in uniform, give you a written price before any work begins, and stand behind the repair with the 365-Day Done Right Promise. When your gate fails, call (213) 322-0062. A live person answers, day or night.
From home to the hills above Los Feliz to the flat streets of Gardena, we service every make and model we encounter, including Viking, Ghost Controls, and DoorKing operators. The Kingswell Guarantee applies to every job: written price, real arrival window, clean job site, and a written guarantee on the repair. That’s the standard at every independently owned Kingswell location, including ours.
Driveway Gate Repair
Driveway Gate Repair means fixing the gate at the entrance to your property, whether it swings on hinges or rolls on a track, and typically covers the gate itself, the operator, the hinges, the wheels, or the track. Most Los Angeles jobs we handle fall into two buckets: the gate won’t move at all, or it moves but makes noise, scrapes, or stops halfway. We send a technician who diagnoses the actual problem, quotes a firm price, and does the work on the spot in most cases.
Swing Gate Diagnosis
A swing gate that won’t open often points to a failed actuator, the motorized arm that physically pushes the gate. We test the motor, check the capacitor, and inspect the arm for stripped gears before quoting the repair.
Track and Wheel Realignment
Sliding driveway gates are prone to worn wheels and bent tracks. We replace the wheels, straighten or replace the track section, and set the chain tension so the gate rolls evenly.
Styles & brands we work with
Gate Welding
Gate Welding repairs cracks, broken pickets, snapped hinges, and stressed joints on steel, iron, and aluminum gates. We bring mobile welding equipment to the property when the damage can be corrected in place, and we remove and transport the gate to our shop when the welding has to happen on a bench. Every weld gets ground smooth, primed, and touched up to match the existing finish where the gate design allows.
Cracked Frame Repair
Heavy gates crack at the corners over time, especially where the operator’s arm connects. We vee out the crack, fill it with full-penetration weld, then reinforce the back side with a gusset plate when needed.
Broken Hinge Re-welding
When a hinge barrel splits or tears from the post, the gate hangs off-plumb and scrapes the ground. We reweld or replace the hinge and reset the gate so it swings level, providing proper hinge & post repair.
Commercial Gate Repair
Commercial Gate Repair covers electric slide gates, swing gates, barrier arms, and bi-folding gates at apartment communities, parking structures, warehouses, and business lots across Los Angeles. Downtime at a secured entry is a security exposure, so we prioritize commercial work with same-day service whenever parts are available locally. All commercial repairs include a written service report and a written Kingswell Guarantee.
Access Control and Operator Diagnostics
We test loop detectors, photo eyes, keypads, and the operator’s control board to isolate whether the failure is mechanical, electrical, or in the access system. That keeps us from replacing a motor when the problem is a bad loop sensor.
High-Cycle Component Replacement
Commercial gates cycle hundreds of times a day, so we recommend and install commercial-grade wheels, rollers, and track systems. We replace worn components before they take out the operator itself.
Iron Gate Repair
Iron Gate Repair addresses bent, rusted, cracked, or sagging iron gates, including rehanging, straightening, welding, and reinforcing the frame. Iron gates are common in our service area from West Hollywood to Bell Gardens, and they age in predictable ways: rust at the bottom rail, stress cracks at the hinges, drooping at the latch side. We fix all of it and treat the repaired areas to slow future corrosion.
Rust Repair and Section Replacement
We cut out rusted sections of pickets or rails and weld in matching replacement stock. Where the rust is surface-level, we grind it back, treat the metal, and prime the repair.
Sagging Gate Rehang
An iron gate that drags on the driveway needs rehanging. We reset the hinges, add a turnbuckle or frame stiffener if needed, and adjust the operator so it doesn’t strain against the gate.
Sliding Gate Repair
Sliding Gate Repair fixes gates that roll horizontally on a track instead of swinging on hinges, often requiring gate realignment. The most common failures we see in Los Angeles are worn v-wheels, a bent track, a snapped chain, or an operator that’s fighting a gate that no longer rolls freely. We diagnose all four in one visit and give you a written price before any work starts.
Wheel and Bearing Replacement
The wheels under a sliding gate carry the entire weight of the gate. When the bearings go flat, the gate shudders and bogs down. We replace the wheels in matching size and material.
Chain and Tension Repair
A loose or snapped drive chain causes jerky movement and can strip the operator’s sprocket. We replace the chain, set the tension correctly, and realign the sprocket so the gate runs true.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is a specific subset of iron gate work, focused on ornamental gates with hand-forged elements, scrollwork, and decorative pickets. These gates are as much architectural character as they are security. Our welders fabricate replacement scrollwork and patch stock in a way that matches the original profile, not just the rough shape.
Ornamental Element Replacement
A missing finial or a broken scroll ruins the look of the gate. We fabricate replacements from matching bar stock and weld them in, then paint to blend with the surrounding finish.
Historic Gate Restoration
Older wrought iron gates in neighborhoods like Los Feliz and Highland Park often have hand-forged joints that need careful repair. We preserve what’s solid and replace only what’s structurally compromised.
Metal Gate Repair
Metal Gate Repair covers aluminum, steel, and iron gates, including the operator, the mount structure, the lock repair, latch, and the gate frame itself. Aluminum gates are common in newer Los Angeles construction and present a different repair profile than steel: less rust, more fatigue cracking and bent sections. We work with the metal the gate is made from, not the metal we prefer to weld.
Aluminum Crack and Bend Repair
Aluminum gates crack at stress points and bend when struck. We weld aluminum cracks with the correct filler rod and straighten bent sections using cold-straightening where possible to avoid weakening the metal.
Steel Post and Frame Reinforcement
Steel gates with undersized posts lean and bind over time. We reinforce the post with a core fill or replace the post entirely, then reset the gate so the operator isn’t overloaded.
Wood Gate Repair
Wood Gate Repair covers sagging, sticking, rotted, and split wood gates, from redwood drive gates in Brentwood to cedar garden gates in Palms. Wood moves with humidity and temperature, which means a gate that fitted perfectly in June will bind in November. We repair what can be saved and replace what can’t, then seal the work against the next wet season.
Frame and Brace Rebuild
A wood gate without a diagonal brace from bottom hinge to top latch sags, always. We rebuild the frame with proper bracing, replace rotted rails, and rehang the gate on heavy-duty hinges.
Rot Repair and Wood Replacement
We cut out rotted sections and splice in matching species, then re-drill hardware. Where the rot has reached the core of the frame, we build a new gate section rather than patch it.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Our technicians train specifically on the operator brands we’re most likely to find in Los Angeles, including Viking, Ghost Controls, DoorKing, and Elite. If you have a Viking swing gate operator that’s been clicking but not moving, we know where the limit switches are and what they cost. We keep Viking OEM parts in the truck, which means fewer return trips.
Ghost Controls and DoorKing units appear in higher volume on newer and mid-age Los Angeles properties. We’ve serviced Ghost Controls linear actuators on residential gates from West Los Angeles to North Hollywood, and DoorKing slide operators on commercial properties in South Gate. Whether you have Viking, Ghost Controls, DoorKing, Elite, or a brand not listed here, we can help. Our diagnostic process is the same: find the failed part, quote the price, fix it right.
Signs You Need a Pro Right Now
- Your gate stops mid-travel and reverses. This is usually an obstruction sensor failing, a worn wheel binding, or a motor drawing too many amps. A gate that stops halfway is a security gap and a pinch hazard. Call us at (213) 322-0062 before it fails completely.
- You hear grinding, squealing, or a loud snap. Grinding usually means metal on metal where there should be a bearing or a gear. A snap often means a chain broke or a weld failed. Running the gate after either sound can damage the operator and increase the repair cost.
- The gate sags and drags on the ground. Sagging is a structural problem, not an operator problem. Every cycle the gate scrapes the driveway, it’s wearing down the bottom rail and overloading the motor. The fix is rehanging or welding, and the longer it drags, the deeper the damage goes.
- Your remote only works from a few feet away. That’s often a failing receiver or antenna. We test range, check the remote battery and receiver sensitivity, and replace the failing component before the gate stops responding entirely.
- You have to hold the remote button down to get the gate to move. A gate that only moves while you hold the button can indicate a safety edge failure or a receiver circuit problem. This is one of those failures that starts as an annoyance and becomes a full stop within weeks.
Our Process, Step by Step
- 1
Call and talk to a person. When you call (213) 322-0062, a live person answers and asks what the gate is doing. We book a real arrival window, not a four-hour shrug.
- 2
On-site diagnosis. The technician shows up in uniform, introduces themselves, and walks the gate with you. We test the operator, the sensors, the track or hinges, and the electrical supply. We use a multi-meter and amp clamp to verify motor draw, not guesswork.
- 3
Written quote, before any work. You get a firm price in writing, broken down by parts and labor. No work starts until you say yes. If the repair doesn’t make sense at that price, we’ll tell you what options you have.
- 4
Repair, done clean. We complete the repair on the spot in most cases, clean the work area, and test the gate through full cycles with the safety systems active. The job site is left as we found it or better.
- 5
Written guarantee and invoice. Every invoice carries the 365-Day Done Right Promise in writing. If the repair fails within 365 days, we come back and fix it at no charge. That’s the Kingswell Guarantee.
How Much Does Gate Repair Cost in Los Angeles?
Gate repair in Los Angeles typically runs between $180 and $900 depending on what’s failed. A basic hinge rehang or sensor replacement on a residential gate usually falls in the $180-$350 range. A swing-gate actuator swap, parts and labor, typically runs $350-$700. Welding repairs, like a cracked frame or broken hinge, usually fall between $250 and $600 depending on how much fabrication is needed. Commercial slide gate repairs, with heavier components and sometimes a second technician, start around $400 and can reach $1,500 for major track or operator replacement.
What affects the price: the size and weight of the gate, whether parts are in the truck or need to be ordered, whether the damage is structural or electrical, and how accessible the gate is. You avoid overpaying by asking for a written quote before work starts and by using a company that doesn’t charge a diagnostic fee on top of the repair. Our estimates are free, and the price we quote is the price you pay. Call (213) 322-0062 for a specific quote on your gate.
Our Service Area Near Los Angeles
We cover Los Angeles and the surrounding neighborhoods, from Gate Repair in Venice on the coast to Gate Repair in West Hollywood mid-city, plus North Hollywood, Brentwood, Gardena, Bell Gardens, Los Feliz, Highland Park, South Gate, Palms, and West Los Angeles. We also handle Gate Repair in Los Angeles proper, including the hillside streets where gate access is part of daily life. Most residential calls get a same-day or next-day arrival window.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in Los Angeles
Gate repair is the diagnosis and correction of any failure preventing a gate from opening, closing, latching, or securing properly. It covers mechanical work like welding, hinge replacement, and wheel or track service, plus electrical work like operator repair, sensor replacement, and remote programming. In Los Angeles, most gate repair calls involve the operator, the gate’s alignment, or the safety sensors. Call (213) 322-0062 and we’ll tell you what’s wrong and what it costs to fix.
Most residential gate repairs are completed within 60 to 90 minutes on site. Welding repairs may take longer due to cooling and finish work. If we need to order a part not on the truck, we’ll give you a timeline before we leave the property.
Gate repair in Los Angeles typically runs between $180 and $900. A simple hinge or sensor repair is at the low end. An actuator replacement, welding repair, or commercial track repair runs higher. Every job gets a written price before work starts, so the quote is what you pay. Call (213) 322-0062 for a free estimate.
Yes. We service Viking, Ghost Controls, DoorKing, and Elite operators, plus BFT, FAAC, Linear, LiftMaster, and Mighty Mule. We stock OEM parts for the brands we see most in Los Angeles, which means fewer return trips and faster repairs.
In most cases, yes. We answer calls live 24 hours a day, seven days a week, including holidays. When a gate is stuck open or won’t close at all, we treat that as an emergency and dispatch as quickly as a technician can get to you. Call (213) 322-0062 and tell us what’s happening.
Every repair carries the 365-Day Done Right Promise, written on the invoice. If the repair fails within 365 days, we return and fix it at no charge. That guarantee is part of the Kingswell Guarantee, the same written standard across every independently owned Kingswell company.
Clear the area around the gate so the technician can access the track, hinges, and operator unobstructed. Move vehicles back from the gate posts. If the gate is part of an access control system, have the keypad code or remote ready. We handle everything else when we arrive.
Schedule Your Gate Repair Service in Los Angeles Today
Call (213) 322-0062 for a free estimate and get a real person on the line, 24 hours a day. We’ll diagnose the problem, give you a written price before any work starts, and stand behind the repair with the 365-Day Done Right Promise. No pressure. Just a gate that works.
Written by Dean Prescott, Owner at Portcullis Gate Repair Los Angeles, serving Los Angeles since 2008.