Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Gardena
Electric gate repair in Gardena usually runs between $185 and $640 depending on the part that failed, and we can typically have a technician at your driveway the same day you call. That’s the honest range most Gardena homeowners pay when a gate motor burns out, a keypad stops reading codes, or a 60-year-old hinge post finally shifts. If your gate won’t open, won’t close, or sounds like it’s grinding itself apart, call (213) 322-0062 and we’ll give you a written price before any work starts. Not a ballpark over the phone that doubles at the door. The actual price, in writing, for the gate that’s sitting in your driveway right now.
We know Gardena’s gates because we’ve worked on hundreds of them. The 1950s ornamental iron in Hollypark. The heavy slide gates along Western Avenue. The sagging swing gates in Moneta that have been dragging on the concrete since the Bush administration. This page is everything we know about fixing electric gates in this specific city, including what things actually cost here. No markups for zip code. Just the real numbers and the straight story.
Key Takeaways
- Electric gate motor repair in Gardena typically costs $285 – $640 parts and labor.
- Keypad, remote, and safety sensor repairs usually fall in the $185 – $420 range.
- Every job gets a written price before work begins. No exceptions.
- Every repair carries the 365-Day Done Right Promise: if it fails within a year, we come back free.
- A live person answers our phone 24/7. Call (213) 322-0062 any hour.
Styles & brands we work with




Why Portcullis Gate Repair Los Angeles Is Gardena’s Preferred Electric Gate Repair Company
Dean Prescott founded Portcullis Gate Repair in 2008, and from the beginning, the standard was simple: write the price down before you touch the gate, show up when you said you would, and stand behind the repair in writing. That’s the Kingswell Guarantee, and every independently owned Portcullis location, including our Los Angeles company serving Gardena, is bound to it. Four promises on every invoice: a written price, a real arrival window, a clean job site, and a written guarantee on the repair. Not marketing language. The actual words printed on the bottom of every work order.
Gardena homeowners call us because they’ve been burned before. Someone quoted them $300 and the bill came to $900. Someone said they’d arrive at 9 a.m. and showed up two days later. Someone replaced a gear and six weeks later the gate was dead again. That’s exactly what the Kingswell Way exists to prevent. The price gets agreed before work starts. The tech arrives in the window we committed to. And if the repair fails inside 365 days, we return and fix it at no charge under the 365-Day Done Right Promise.
Our technicians are background-checked and arrive in uniform. You’ll know who’s pulling up before they ring the bell. And when you call our office at (213) 322-0062, a live person answers. Not a callback queue. Not “your call is important to us.” A person. At 2 p.m. on a Tuesday or 2 a.m. on a holiday. The same fast local service we provide across Electric Gate Repair in Gardena and the surrounding South Bay communities.
Electric Gate Motor in Gardena
The electric gate motor, the box that sits on the gate post and does the physical work of pushing or pulling the gate open, is the single most common repair we perform on Gardena properties. Most swing gate motors in this city last 8 to 12 years before the capacitor, gears, or limit switches start to fail, and the coastal air here doesn’t help. Salt from the Pacific, only about five miles west, works its way into housings and corrodes terminals faster than you’d see in, say, Downey or Whittier. When a Gardena homeowner’s gate starts opening halfway, buzzing without moving, or tripping the breaker, it’s usually the motor, not the gate itself.
A typical electric gate motor replacement in Gardena runs $285 – $640 parts and labor, depending on whether you need a basic linear arm actuator or a full underground operator. We stock motors and parts from FAAC, Linear, DoorKing, Ghost Controls, and Viking in our Los Angeles shop, so most repairs don’t wait on a freight delivery. For customers with vintage gates, we take the time to match the motor housing and mounting style so the new unit doesn’t look like a modern afterthought bolted onto a 1962 original.
Actuator Swaps on Ornamental Gates
The actuator, the motorized arm that actually pushes the gate leaf open, is what fails most often on Gardena’s older ornamental iron gates. Rust gets into the worm gear, the internal stops wear down, and the arm starts shuddering instead of swinging smoothly. Most swing-gate actuator swaps run $320 – $540 in Gardena, with the new arm matched to the gate’s weight and length so it isn’t straining from day one.
Underground Operator Work
Some higher-end Gardena properties, particularly the larger lots with fully custom gates, run underground operators that hide the mechanism inside a steel box set into the driveway. When these fail, water intrusion and corroded linkage are usually at fault. Repairs run $480 – $640 typically, and we pull the old box, reseat or replace it, and re-waterproof the housing before closing the vault back up.
Gate Access Control in Gardena
Gate access control in Gardena covers everything that tells the gate who’s allowed in: keypads, remotes, intercoms, vehicle sensors, and the circuit board that ties them all together. Gardena’s mix of original character and newer construction means we see access control jobs on both ends of the spectrum. Some homes still run 30-year-old keypad systems wired into a garage-door opener repurposed as a gate controller. Others have full intercom and camera entry systems tied to the phone and the house alarm. Either way, when the keypad deadens or the remote stops rolling codes, the gate becomes a manual chore.
Keypad and remote repairs in Gardena typically run $185 – $340. If the control board itself has failed, which we diagnose with a meter rather than a guess, expect $260 – $480 for a new board programmed to your existing remotes and sensors. The Kingswell Guarantee applies here exactly as it does on a full motor replacement: written price, written warranty, free return visit if the repair fails within 365 days.
Keypad and Remote Matching
On vintage Gardena gates, we take care to install access hardware that doesn’t visually clash with the period ironwork. A modern backlit keypad can look wrong bolted next to hand-forged scrollwork. We offer keypad and card reader options that sit low-profile, and we program them on-site so every existing remote still works before we leave.
Intercom and Camera Entry Retrofit
For Gardena homeowners adding or upgrading entry hardware, we can tie a new access system into the existing wiring if it’s salvageable, or run fresh low-voltage lines where the old cable has corroded. A typical intercom retrofit with one keypad and two remotes runs $420 – $680 installed, depending on wire run length and whether we’re mounting to stucco or masonry gate posts.
Trusted Brands We Service in Gardena
Our technicians arrive already trained on the specific operator sitting at your property, because we service nine major gate-operator brands and keep common parts in local stock for Gardena customers. FAAC, Linear, DoorKing, Ghost Controls, Viking, BFT, LiftMaster, Elite, and Mighty Mule. That matters when a 40-year-old FAAC on a Moneta original is pulling double its rated amperage, and the tech needs to know without being told that the 770 series is the drop-in match. It speeds up the diagnosis. It means fewer visits. And it means the part that gets installed is the right one, not whatever was on the truck. For Gardena homes with the brands above, our Electric Gate Repair team stocks actuators, control boards, photocells, and remote kits so most jobs wrap in a single visit.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Gardena Homes
- Rust-through at the bottom rail. Gardena’s marine air, only about five miles inland from the Pacific, accelerates corrosion on 1950s – 70s ornamental steel gates. We regularly see bottom rails rotted through where sprinkler overspray kept the metal damp for decades, especially in Hollypark and Moneta.
- Sagging gates from failed hinge posts. Sandy Gardena soil and cracked post footings let hinge posts lean over time. A gate that dragged cleanly ten years ago now scrapes the driveway, and the motor strains harder every cycle until it burns out.
- Worn rack and pinion teeth on commercial slide gates. Along Western Avenue and Rosecrans Boulevard, heavy rolling gates take constant abuse. Rack teeth strip, the chain stretches, and the gate starts jumping instead of rolling. These need more frequent rack and pinion replacement than typical residential swing gates.
- Dead control boards from coastal moisture. Salt-laden air corrodes circuit board terminals and connector pins over time. A board that ran for a decade can short out on the second decade just from atmospheric moisture, and the gate goes dead with no warning.
Pricing for Electric Gate Repair in Gardena, CA
Here are the numbers our Gardena customers actually pay, based on the last several years of jobs in this city:
- Gate motor or actuator replacement: $285 – $640
- Keypad, remote, or safety sensor repair: $185 – $340
- Control board replacement: $260 – $480
- Intercom or camera entry retrofit: $420 – $680
- Hinge post reset with new concrete footing: $380 – $720
What moves the number within those ranges is gate weight and material, operator type, and whether the failed part requires matching to an existing system or can be swapped with a standard part. Every quote is written and agreed before the first bolt is turned. You’ll never see a higher number after the work is done. Call (213) 322-0062 for an exact quote. Estimates are free, and a live person answers.
We Also Serve Cities Near Gardena
Our Gardena customers are our priority, but we run calls in the surrounding South Bay and South Los Angeles areas all week. If your gate is down in Lawndale, South Gate, El Segundo, or parts of Los Angeles near the Gardena line, call us. The same written price guarantee and 365-Day Done Right Promise apply everywhere we work.
Serving Gardena, CA - Our Local Coverage Area
We’re based in the Gardena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Gardena
Gardena’s marine air, only about five miles from the Pacific, carries salt that accelerates steel corrosion, and sprinkler overspray keeps the bottom rail damp for hours every day. Yes, we repair these instead of replacing the gate. We cut out the rotted rail section, weld in new steel tubing matched to the original profile, and re-finish the repaired area. The gate keeps its period character for a fraction of replacement cost. Call (213) 322-0062 for an on-site inspection.
Usually, yes. Sandy Gardena soil lets concrete post footings crack and shift over decades, and once the hinge post leans, the motor has to fight the gate’s weight plus the friction of scraping concrete. We reset the post in fresh concrete, re-hang the gate, and then check the operator’s current draw to make sure it isn’t already damaged from running against that resistance. Typical cost: $380 – $720. Estimates are free, and the price is written before we start.
We do this regularly on Gardena’s 1950s – 70s ornamental gates. The key is selecting an actuator that suits the gate’s weight and mounting style, then placing it discreetly on the back side of the post so it doesn’t interrupt the front-facing ironwork. We also offer keypads and photoeyes in low-profile finishes that don’t clash with period detail. Every brand we install carries the same 365-Day Done Right Promise. Call us to schedule a site look.
Yes. Commercial slide gates along Western Avenue and Rosecrans Boulevard cycle hundreds of times daily and occasionally take a hit from a delivery truck. Rack teeth strip and chains stretch under that load, so we recommend a maintenance check every six months on these properties. Replacement rack and pinion work runs $420 – $680 depending on gate length and tooth pitch, and we keep common rack stock locally to minimize downtime.
UL 325 requires entrapment protection on every automated gate: either a reversing edge or tested photoeyes, and the system must reverse on contact with an obstruction. You can check the photoeyes by blocking the beam while the gate closes; it should stop and reverse immediately. If it doesn’t, call us and we’ll test the entire circuit with a meter, not a guess. Retrofitting compliant photoeyes on a functional Gardena gate typically runs $185 – $340. Call (213) 322-0062 for an exact written quote.
Call Portcullis Gate Repair Los Angeles for Electric Gate Repair in Gardena
If your gate is down, call (213) 322-0062. A live person answers, we’ll get your address and gate type, and we’ll put a real arrival window on the books. The price gets written down before any work starts. The repair gets a written 365-day guarantee. And if it fails inside that year, Dean Prescott’s team returns and makes it right at no charge. That’s the Kingswell Way, and it’s how we’ve served Gardena since we started taking calls here.
Written by Dean Prescott, Owner at Portcullis Gate Repair, serving Gardena since 2008.