Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Commerce, CA
Gate repair in Commerce, CA is defined by one thing: this is a working city. Nearly 40% of the land is industrial, and the residential streets sit close to warehouses, truck yards, and rail corridors that never fully quiet down. Gate systems here fail differently than they do in Culver City or Pasadena. The operators run more cycles, the steel takes more abuse from truck vibration and summer heat, and the electrical systems get pushed harder because a gate that won’t open isn’t just an annoyance here, it stops a delivery route or leaves a loading dock exposed overnight. If you need a gate company in Commerce that understands heavy-duty sliding gates and cantilever systems as well as residential swing gates, call us at (213) 322-0062.
Why Commerce Homes Are Different
Commerce sits in a pocket of the San Gabriel Valley where the housing stock is mostly single-family homes and small apartment buildings from the 1940s through the 1960s. Driveways are typically short, and the gates tend to be chain-link or wrought iron, installed decades ago and now paired with operators that may be older than the cars parked behind them. Upgrading one of these systems means working around tight setbacks and older electrical panels, not just swapping out a hinge.
The bigger factor is the industrial geography. Many residential and commercial properties in Commerce border active freight rail lines or the Los Angeles River channel. Train vibration travels through the soil and into gate posts, gradually knocking rollers out of alignment on sliding gates and loosening mounting bolts on operators. We see this on the east side of the city, where the rail corridors run north-south, and along the river-adjacent streets where the ground shifts seasonally. A sliding gate that worked fine in January can be dragging on its track by August.
Then there’s the climate. Commerce gets hot, dry summers with occasional Santa Ana wind events, and the heat does two things: it pushes gate operators toward thermal overload, and it expands metal enough to change clearances on tight-fitting gates. Winter rain is the other half of the cycle, driving rust into exposed hinges, rollers, and chain drives. A gate company working in Commerce has to account for both seasons, not just the one in front of them on the day of the call.
Styles & brands we work with
Our Main Commerce Services
Most calls we get in Commerce fall into one of two buckets: a gate that stopped moving, or a gate that needs to be replaced with something better suited to the property. These are the services Commerce homeowners and business owners call us about most.
Gate Repair in Commerce
When a gate stops opening in Commerce, the cause is usually tied to how hard the system works. Sliding-gate rollers wear out faster near the rail corridors, cantilever gates develop premature roller wear from vibration, and swing-gate hinges bind as the summer heat expands the steel. We diagnose the specific failure, then give you a written repair quote before any work starts. Whether it’s a broken roller, a bent track, or a swing gate that’s sagging off its post, the repair includes our 365-Day Done Right Promise in writing. Gate Repair in Commerce gets into the full breakdown on that page.
Gate Installation in Commerce
Replacing a gate in Commerce usually means rethinking what the property actually needs, because so many sites here have unusual constraints. A short residential driveway off a busy street may need a slide gate rather than a swing gate, simply because there isn’t room for the arc. A warehouse entrance may need a cantilever gate that rides above the ground so debris and rail dust don’t jam the track. We size the gate and the operator to the real use pattern, then install it with a written Kingswell Guarantee on the whole job. Gate Installation in Commerce covers the full process and what it costs.
Electric Gate Repair in Commerce
Electric gate problems in Commerce often trace back to heat. Operators mounted in direct sun on the south side of a building run hot, and older units can trip thermal overloads on a 95-degree afternoon. Rain brings a different set of issues: water intrusion into control boards, corroded limit switches, and photo eyes knocked out of alignment by wind or vibration. We service commercial and residential systems, including high-cycle operators that run dozens of times a day. Electric Gate Repair in Commerce explains the diagnostics and typical repair costs in detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Commerce
Our technicians are trained on the gate operators we see most in Commerce, including Linear, Viking, and DoorKing. We also carry the common replacement parts locally for these systems, which means a repair doesn’t stall while a part ships from out of state. Our brands page lists every manufacturer we service and the systems we know inside and out.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Commerce, CA
Gate repair costs in Commerce run higher than in purely residential cities because so many of the systems are commercial-grade and have to be repaired on a schedule that doesn’t shut down the property. Here’s what you can expect to pay for common jobs in this area:
| Service | Typical range in Commerce |
|---|---|
| Swing gate repair | $450 – $950 |
| Sliding gate repair | $500 – $1,200 |
| Gate motor / operator replacement | $750 – $1,800 |
| Gate sensor / photo eye replacement | $250 – $500 |
| Gate track repair or realignment | $300 – $800 |
| Gate wheel / roller replacement | $250 – $600 |
| Full wrought iron gate replacement | $2,500 – $6,000 |
| Full chain-link gate replacement | $1,500 – $3,500 |
| Gate intercom / keypad system | $500 – $1,500 |
| Emergency gate repair | $650 – $1,400 |
Two things push prices toward the higher end in Commerce. First, commercial gates are bigger and heavier, which means larger rollers, stronger operators, and more labor to set things right. Second, emergency calls on warehouse gates that can’t wait until morning carry a premium because they pull a technician off a scheduled route. Whatever the job, you’ll get a written price before any work starts, and that price doesn’t change after the gate is disassembled.
Neighborhoods We Serve in Commerce
Commerce is a small city by population, but the gate work spans a wide mix of property types. We work residential streets, apartment buildings, and commercial facilities across the city, including these neighborhoods:
- Bandini
- Bristow Park
- Rosewood Park
- Veterans Park area
- The industrial corridor along the 5 Freeway
Because Commerce is compact, our response times are consistently short across the whole city. A residential call on the west side and a warehouse call near the rail yards aren’t far apart. Most non-emergency service calls in Commerce can be scheduled within one to two business days, and we do offer 24/7 emergency response for gates that are stuck open or stuck closed and can’t be secured.
Service Area – Cities Near Commerce
While this page covers Commerce specifically, our crews serve the surrounding area too. We work on gate systems in Los Angeles, CA, where the housing and gate types vary block by block. We also serve Venice, CA on the west side, West Hollywood, CA for residential and small-commercial gates, and North Hollywood, CA to the north. If your property falls just outside Commerce’s city limits, call us and we’ll let you know if we cover your street.
Serving Commerce, CA - Our Local Coverage Area
We’re based in the Commerce area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Commerce
For a gate that’s stuck open or won’t close, we dispatch emergency technicians around the clock, including weekends and holidays. Non-emergency calls in Commerce are typically scheduled within one to two business days. A live person answers our phone 24 hours a day, so you’ll never be routed through a voicemail tree when you need to know when we can arrive. Call (213) 322-0062 and we’ll give you a real arrival window.
In some cases, yes. Commerce is a code-enforcement-conscious city, and gate replacements that involve new footings, electrical runs, or changes to the driveway approach can trigger a permit requirement. We’ll flag this during the quote process and tell you exactly what’s needed for your specific property, so you’re not surprised by a stop-work order down the line.
Yes, and it’s a substantial share of our Commerce work. We maintain and repair sliding gates, cantilever gates, and high-cycle operators at warehouses, truck yards, and loading facilities across the city. The crews who handle these jobs are the same background-checked, uniformed technicians who handle residential calls, and every job carries the same written Kingswell Guarantee.
If your gate is acting up in Commerce, call (213) 322-0062 and you’ll get a live person, a straight answer, and a written price before any work begins. That’s how we’ve done it since 2008, and it’s how every independent Kingswell company operates.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Commerce Customers Say
"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick