Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in West Los Angeles, CA
Gate work in West Los Angeles comes with a particular set of challenges: mid-century steel frames, salty marine air, and original operators that have been swinging driveway gates since the 1970s. Portcullis Gate Repair handles all of it, from a misaligned track on a Spanish Colonial off Barrington to a rusted actuator arm on a ranch-style home near Sawtelle. Every job starts with a written price before any work begins, so you’ll know the full cost before a single bolt is turned. Call (213) 322-0062 and a live person answers, day or night.
Why West Los Angeles Homes Are Different
West Los Angeles gate repair is defined by the prevalence of automatic driveway gates on mid-century single-family lots, often with original steel frames and 1970s-era operators that must be serviced or upgraded to comply with current safety standards, while also addressing the heavy coastal air corrosion from the nearby Pacific. The housing stock here runs heavily toward 1920s – 1950s Spanish Colonial and ranch-style homes with long driveways, and many of those original wrought iron and steel gates are still in place. They’re beautiful, but they fight the marine layer every morning.
That persistent fog carries moist, salty air that accelerates rust on gate hardware and shortens the life of exposed electrical components. We regularly find limit switches and control boards that have corroded well before their time. Occasional Santa Ana winds add another layer of stress, pushing gates out of alignment and wearing down track rollers. And many West LA gates still run on outdated linear-arm operators that local technicians often retrofit with battery backup after power outages during Santa Ana-driven heat waves. When the grid flickers, those older systems can lose their travel limits and start slamming or stopping mid-cycle.
Styles & brands we work with




Our Main West Los Angeles Services
Most West Los Angeles homeowners call us for one of two reasons: a gate that has stopped moving, or a gate that needs to go in fresh. Here’s how each plays out in this part of town.
Gate Repair in West Los Angeles
A gate that won’t open or closes with a metal-on-metal scrape usually comes down to rusted hinges, a failing actuator, or a damaged track. In West Los Angeles, the salt air tends to chew through hinge pins and bearings faster than homeowners expect. We diagnose the specific fault, quote the repair in writing, and handle everything from bent track sections to replacement of original steel hardware. Dean Prescott oversees every job to make sure the repair matches the gate’s age and construction. See Gate Repair in West Los Angeles for a full breakdown of what we fix.

Gate Installation in West Los Angeles
New gate installations here often mean working with 1920s – 1950s driveways that were built before modern setback rules. We take measurements on site, order the correct steel or aluminum frame for the opening, and set the posts in concrete that will hold through years of coastal weather. The growing number of modern stucco multifamily buildings with secured entry gates also keeps our install calendar full. Gate Installation in West Los Angeles covers the process from first measure to final walk-through.

Electric Gate Repair in West Los Angeles
When the gate’s mechanical parts are fine but the motor won’t respond, the issue is usually electrical: a dead capacitor, a corroded control board, or a limit switch that has lost its setting. The marine layer is hard on exposed electrical components, and we see far more corrosion-related failures here than inland. We service nine major operator brands and stock common parts locally to keep turnaround tight. Electric Gate Repair in West Los Angeles details what we check and what we replace.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in West Los Angeles
We service FAAC, BFT, Linear, and Viking operators across West Los Angeles, along with five other major brands. Our Los Angeles office keeps common control boards, actuators, and limit switches in stock, so a repair doesn’t stall waiting on a part to ship. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in West Los Angeles, CA
| Service | Typical range in West Los Angeles |
|---|---|
| Hinge replacement (single gate) | $125 – $275 |
| Hinge replacement (double gate) | $230 – $475 |
| Track realignment and cleanup | $110 – $220 |
| Chain replacement | $100 – $215 |
| Gate wheel/pulley replacement | $115 – $230 |
| Keypad installation | $130 – $285 |
| Loop detector replacement | $150 – $350 |
| Photo-eye sensor replacement | $115 – $230 |
| Swing gate actuator swap | $500 – $950 |
| Slide gate operator replacement | $750 – $1,600 |
| Control board replacement | $250 – $650 |
| Battery backup installation | $300 – $700 |
Coastal corrosion is the biggest price variable in West Los Angeles. When rust has spread from a hinge into the gate frame itself, the repair scope grows. Whatever the job, you’ll have the full price in writing before we start, and that price doesn’t change when the work is done.
Neighborhoods We Serve in West Los Angeles
We cover all of West Los Angeles, from Cheviot Hills and Rancho Park up through Sawtelle and Westwood. Our typical response window for the area is one to two hours for emergency gate failures, with scheduled appointments available six days a week.
- Cheviot Hills
- Rancho Park
- Sawtelle
- Westwood
- Mar Vista
Service Area – Cities Near West Los Angeles
We serve the broader Los Angeles basin beyond West Los Angeles. If you’re in Los Angeles, CA, Venice, CA, West Hollywood, CA, or North Hollywood, CA, the same Portcullis standard applies: a written price, a real arrival window, and a written guarantee on the repair, everywhere we work.
Serving West Los Angeles, CA - Our Local Coverage Area
We’re based in the West Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in West Los Angeles
We keep crews stationed across West Los Angeles, and most emergency calls are answered within one to two hours. A live person takes your call at (213) 322-0062 any time of day. If it’s a structural or electrical failure, we’ll tell you what to expect before the truck rolls.
Most repairs and operator replacements don’t require a permit. For new installations involving new posts or electrical runs, we check the local requirements as part of the estimate. Either way, you’ll know before we start whether any paperwork is needed.
Yes. We serve all of West Los Angeles, including Cheviot Hills, Rancho Park, Sawtelle, Westwood, and Mar Vista. If you’re unsure whether your address falls in our coverage area, call (213) 322-0062 and we’ll confirm right away.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Los Angeles Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace