Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterWeld & Rust Repair in Los Angeles, CA
Weld and rust repair in Los Angeles typically costs $150 to $450 for most residential driveway gates, depending on how far the corrosion has spread and whether structural steel needs to be cut out and replaced. We handle everything from surface rust that’s starting to bubble the powder coat to cracked hinge welds that have let a gate sag an inch or two out of square. If the damage is past saving, we’ll tell you straight rather than patch something that will fail again in six months.
Portcullis Gate Repair Los Angeles has been doing weld and rust work on driveway and pedestrian gates since 2008. The salty air near the coast, the damp morning fog that settles into the canyons, and the sprinkler overspray that hits gates along dozens of LA neighborhoods all eat through steel faster than people expect. We’re an independently owned Kingswell company, which means every weld and rust repair we do carries the same written guarantee and the same upfront pricing as every other Kingswell location. Call us at (213) 322-0062 and a live person picks up, any hour.
If you’re looking for broader gate work beyond rust and weld issues, see our main Gate Repair page or the full breakdown of Gate Repair in Los Angeles.
When You Need Weld & Rust Repair
Rust on a gate is rarely just cosmetic, especially in Los Angeles where coastal moisture and irrigation systems keep metal damp for hours at a time. Here’s what sends most of our LA customers to the phone:
- The gate is sagging at the hinge side. When a weld cracks or the steel around a hinge pin rusts thin, the gate drops. You’ll see the latch no longer lines up with the post, or you’ll hear the gate drag across the driveway at the latch corner.
- Rust is bubbling through the paint or powder coat. Those small blisters near weld joints or along the bottom rail mean moisture has gotten under the finish. Once it starts, it spreads faster than most homeowners expect, especially in neighborhoods like Pacific Palisades or Playa del Rey where salt air is in play year-round.
- A weld has cracked clean through. This happens often on gates that use a heavy ornamental steel frame with lighter infill bars. The frame flexes, the infill doesn’t, and the welds between them eventually snap at the stress points.
- The gate was hit by a vehicle or a hard wind gust. Weld repairs after an impact are common on hillside properties in Studio City and Silver Lake, where a gate catches more wind load than a flat-lot gate ever will.
- Hinges or mounting plates are pulling away from the post or the gate frame. This is usually a combination of rust and failed welds. The metal thins, the weld loses purchase, and the whole connection starts to fail.
- You bought the house and inherited a neglected gate. Dozens of homes across the LA basin have steel gates that haven’t been touched in 10 or 15 years. If you can see orange staining at the bottom rail or hear flaking rust inside the frame, it’s time to have someone look before the damage gets into structural members.
If any of these sound like your gate, a phone call is the fastest way to know what you’re dealing with. (213) 322-0062.
Our Weld & Rust Repair Process
We don’t grind, smear a coat of paint over the rust, and drive away. Here’s how we actually approach weld and rust repair, step by step, on a typical Los Angeles residential gate:
- Inspection and written quote. We inspect the gate in place: hinge welds, bottom rail, mid-rail, latch post, and any ornamental steel trim. You get a written price before any work starts, no exceptions. That price is the price.
- Surface prep. We strip the rust mechanically, which usually means grinding to bare metal on the affected areas rather than applying a chemical converter and hoping for the best. On a gate with surface-only rust, this is often the entire repair.
- Weld repair or replacement of affected sections. If steel is cracked, separated, or too thin from rust to safely weld, we weld in new matching steel. When the original gate used a hollow tube frame that has rusted from the inside out, the fix may be a replacement section rather than a patch. We’ll explain that on the inspection before any cutting happens.
- Rust-inhibiting primer and finish. Once the metal is clean and the welds are ground smooth, we prime the repaired area with a rust-inhibiting primer, then match the finish as closely as the material allows. For a gate that’s fully rusted across multiple sections, a full strip and repaint may be the better path, and we’ll price that separately and honestly.
- If needed, realign the gate. A rusted or cracked hinge is often why the gate sagged in the first place. After the repair, we check the latch alignment and gate travel so the operator isn’t fighting a gate that’s out of square.
- Written guarantee. Every weld and rust repair gets the Kingswell Guarantee on the invoice: 365 days, written down, with a free return visit if the repair fails within that window.
Weld & Rust Repair Pricing in Los Angeles
The honest answer is that weld and rust repair pricing depends on how far the damage has gone-see How Much Does Gate Repair Cost? (2026 Price Guide) - Los Angeles, CA for typical ranges. Surface rust on a small section of ornamental steel is a very different job than cutting rust-thinned sections out of a load-bearing frame. Here’s what most homeowners in LA actually pay, based on the work we’ve done across the city:
- Rust removal and repaint, small area (rust bubbling but no structural damage): $150 to $300. This is common on gates in the San Fernando Valley where sprinkler overspray has hit the bottom rail for years but the steel is still solid underneath.
- Cracked weld repair, single weld point: $180 to $350. Includes grinding, welding, and finish touch-up at the repaired area.
- Hinge plate repair or replacement with welding: $250 to $450 per hinge. This is the job that fixes a gate that’s started to sag.
- Section replacement due to rust-through: $300 to $600 per affected section, depending on the steel profile and how much of the surrounding frame has to come apart. This is more involved than a patch because we’re cutting out the weakened metal and welding in new material to match.
- Full gate rust treatment, repaint, and multiple weld repairs: $600 to $1,200+ for a double driveway gate that has been neglected for a decade. We price this after seeing the gate in person, not over the phone, because the difference between surface rust and structural rust is impossible to know from a description.
What affects the price most is whether the rust has compromised structural steel. A gate that looks rough but is still solid can often be saved with grinding, priming, and repainting. A gate that’s flaking away at the bottom rail or the hinge mounts is often past that point, and a Gate Realignment or partial rebuild is the only repair that will actually last. We’ll never recommend a full replacement when a weld repair will do the job, and we’ll never quote you a patch job that we know won’t hold. Call (213) 322-0062 for a free estimate, and we’ll give you the written number before any work starts.
FAQs – Weld & Rust Repair
Can you fix a rusted gate, or does it need to be replaced?
Most rusted gates in Los Angeles can be repaired, not replaced, as long as the structural steel isn’t too thin to safely weld. Surface rust that hasn’t compromised the tube or channel frame is usually a grinding, priming, and repainting job. If the bottom rail has rusted through or the hinge mounting points have lost too much steel, partial section replacement is often the smarter fix than replacing the entire gate. Call (213) 322-0062 and we’ll tell you which category your gate falls into after looking at it.
How much does rust repair on a gate cost in Los Angeles?
Most rust repair jobs run between $150 and $450, depending on how many areas need treatment and whether any welding is required. Full rust treatment on a double driveway gate with multiple weld repairs can run higher, from $600 to $1,200. The written price before work starts is part of the Kingswell Guarantee, so what we quote is what you pay.
Can you come out today to repair a weld or rust damage?
We answer calls 24/7, and we’ll give you a real arrival window when you call, not a vague “sometime this week.” Rust and weld repairs usually aren’t emergencies, but a broken gate hinge or a weld that’s failed on a security gate can be, and we treat it that way. Call (213) 322-0062 and we’ll get you on the schedule.
What kind of gates can you weld?
We weld steel and iron driveway gates, pedestrian gates, and ornamental gates, including frames, hinges, pickets, and support posts. We don’t weld aluminum, which requires a different process and equipment than steel. If your gate has a motorized operator from a brand like Viking, Ghost Controls, or DoorKing, we’re trained on those systems and will make sure the weld repair doesn’t interfere with the operator’s travel and limit settings-part of our full Automatic Gate Repair service.
How long does a weld or rust repair last?
A properly prepped and welded rust repair should last for years, and every repair we make carries a 365-day written guarantee. If the repair fails inside that window, we come back and fix it at no charge under the 365-Day Done Right Promise. That promise is printed on every invoice we hand out, not tucked into a terms and conditions page.
Call Portcullis Gate Repair Los Angeles for Weld & Rust Repair
If your gate is rusted, sagging, or has a cracked weld, call us at (213) 322-0062. You’ll get a live person on the line, a real arrival window, a written price before any work starts, and a written 365-Day Done Right Promise when the job is finished. No no-shows. No price changes at the door. Just a gate repaired correctly and a guarantee on the invoice to prove it.
Key Takeaways
- Weld and rust repair costs in Los Angeles typically run $150 to $450 for most residential jobs, with full gate treatments ranging higher.
- Rust on a gate is rarely cosmetic alone. In LA’s coastal and sprinkler-heavy neighborhoods, rust spreads until it compromises structural steel.
- We don’t patch over rust. We remove it, treat the bare metal, and weld in new steel where the original is too far gone.
- Every repair carries a written 365-Day Done Right Promise. If it fails inside the guarantee period, we come back at no charge.
- Call (213) 322-0062 for a free estimate. A live person answers, 24 hours a day, 7 days a week.
The easiest way to know what your gate needs is to get a professional gate repair assessment in Los Angeles from a Kingswell company that gives you a written price before any work starts. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
Written by Dean Prescott, Owner at Portcullis Gate Repair Los Angeles, serving Los Angeles.