Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Hancock Park
Gate installation in Hancock Park runs $2,400 – $7,800 for most residential projects, with custom HPOZ-compliant ironwork on the higher end and standard operators on the lower end. We’ve been fitting driveway gates, pedestrian gates, and electric openers throughout Hancock Park since 2008, so we know exactly what the Historic Preservation Overlay Zone will approve and what will get sent back. If you’re planning a new gate on Rossmore, Muirfield, or anywhere around Larchmont, call (213) 322-0062 and we’ll walk the property, measure the opening, and hand you a written price before any work begins.
Why Portcullis Gate Repair Los Angeles Is Hancock Park’s Preferred Gate Installation Company
Hancock Park is not a neighborhood where you can bolt on a stock aluminum gate and call it done. The HPOZ board reviews gate designs against the Period Revival character of each block, and we’ve spent years learning what passes on a Spanish Colonial versus what fits a Tudor on June Street. Our technicians are background-checked, uniformed, and trained across nine gate-operator brands, so the person who arrives at your driveway already knows whether you have a Viking board, a Ghost Controls arm, or an old DoorKing that needs matched wiring.
We don’t pad the estimate after the truck pulls up. The Kingswell Guarantee applies to every job: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. When a Hancock Park homeowner calls about a sagging custom iron gate or an opener that quit, we answer live, 24 hours a day. Dean Prescott founded this company on that standard in 2008, and every installation still carries the 365-Day Done Right Promise. If the gate fails inside that year, we return and fix it at no charge.
Styles & brands we work with
Sliding Gate Installation in Hancock Park
Sliding Gate Installation in Hancock Park often means a custom track, a heavy cantilever frame, and an operator sized for a door that weighs more than the spec sheet assumes. Many of the original 1920s lots here run long and narrow, especially east of Larchmont toward Windsor, so a swing gate would eat the driveway. A sliding gate rides on a steel track or cantilever rollers and tucks back against the hedge line, which is the cleaner solution for tight setbacks.
Setting the Track and Posts
We don’t reuse old posts on a sliding gate unless they’re dead true. A shifting post means a binding gate, a burned motor, and a service call within months. On most Hancock Park installs we cut new footings, set the track level, and shim the steel so the gate rolls with one hand.
What a Sliding Gate Installation Costs Here
A standard sliding driveway gate in Hancock Park starts around $5,200 and runs to $8,900 when you add custom cladding, an operator, and safety edges. The track, the motor, and the steel panel are priced separately so you see exactly where the money goes, and that price is written down before we turn a bolt.
Gate Opener Installation in Hancock Park
Gate Opener Installation in Hancock Park frequently involves retrofitting a 100-year-old iron gate with a modern operator that won’t tear itself apart on the first cycle. The old hand-forged panels here are heavy, sometimes 500 pounds or more, and a residential-grade opener sized for a Home Depot tube-steel gate will burn out in months. We spec units with enough torque for the door’s actual weight, then tune the force settings and safety loops for Hancock Park’s specific demands.
Underground Operators for Period Gates
On a custom driveway gate where surface-mounted arms would wreck the original ironwork, we install underground operators. The motor box and gear train sit below the hinge post, invisible from the street, and the gate swings without any visible machinery. This is common on Rossmore and Highland Avenue properties where the HPOZ wants nothing modern showing.
Solar and Low-Voltage Options
Some Hancock Park homes have no practical conduit run to the gate, especially where a concrete driveway was poured in the 1940s and nobody wants it cut. A solar-charged Ghost Controls or LiftMaster opener can work here, but only if the gate is properly balanced and the panel gets direct sun. We’ll tell you honestly if solar won’t hold up on your lot, because a gate that won’t open on a cloudy February morning is not a repair we want to sell you.
Trusted Brands We Service in Hancock Park
We stock parts and service nine major gate-operator brands, so when a Viking board fails or a Ghost Controls arm strips, we usually have the replacement on the truck when we arrive in Hancock Park. DoorKing and Elite units are common on older estates here, and we keep their controller boards, receivers, and limit switches in our local inventory. If your gate runs on something older or discontinued, we can often source or match the part through our salvage contacts, and we’ll always tell you the price before we order it.
Common Gate Installation Problems We See in Hancock Park Homes
- HPOZ rejections on stock gates. The city’s Historic Preservation Overlay Zone regularly sends back off-the-shelf gates that don’t match the neighborhood’s Period Revival character. Homeowners end up paying for a tear-out and a custom refit because the first installer never checked the HPOZ requirements.
- Sagging bespoke iron gates. Original hand-forged gates from the 1920s are heavy, and when an installer reuses the original undersized hinge post without correction, the gate sags within a year. We set a new footing or reinforce the post before the gate ever goes back on.
- Undersized operators on custom doors. We regularly replace openers that were sized for a standard gate but installed on a heavy period iron door. The motor overheats, the gear strips, and the gate stops halfway open. The fix is an appropriately rated unit, not another cheap replacement.
- Rust and metal fatigue from the climate. Hancock Park’s dry summers and wet winters cause iron gates to expand, contract, and rust at the joints. If the protective coating is skipped or the weep holes are missing, the bottom rail becomes a rust line within two seasons. We treat and seal every custom gate we install.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Hancock Park, CA
A basic pedestrian gate installation in Hancock Park runs $1,400 – $2,600. A standard driveway swing gate with one operator: $3,800 – $5,700. A custom wrought iron driveway gate built to match a 1920s original, with fabrication, period hardware, and a high-torque opener: $7,000 – $14,000. Sliding gate systems typically run $5,200 – $8,900. The variables are the gate’s weight, the post’s condition, the operator you choose, and whether HPOZ review requires salvage hardware or custom fabrication. We give you a written, line-itemed price before any work begins, and that number does not change at the door. Call (213) 322-0062 for a free measure and written estimate.
We Also Serve Cities Near Hancock Park
Beyond Hancock Park, our crews handle gate installation in Los Angeles, Venice, West Hollywood, and North Hollywood. If you’re just outside the neighborhood, call and we’ll let you know our next available window. For more on what a full job involves, see our Gate Installation service page, or read about Gate Installation in Hancock Park for the details covered here.
Serving Hancock Park, CA - Our Local Coverage Area
We’re based in the Hancock Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Hancock Park
Yes, the Historic Preservation Overlay Zone requires new gate designs and materials to be compatible with the neighborhood’s Period Revival character. That usually means wrought iron or steel built to match the original 1920s hand-forged dimensions, not powder-coated aluminum from a catalog. Your best move is to submit the design through a contractor who has passed Hancock Park HPOZ reviews before, because a rejection means starting over. We can prepare drawings and source period-correct hardware so your gate clears review the first time. Call (213) 322-0062 and we’ll walk you through it.
Sometimes, but not always. A solar opener works if the panel gets direct sun for most of the day and the gate is properly balanced. A 1920s hand-forged gate that weighs 500 pounds needs a serious battery bank and a large panel, and a shaded lot on a tree-lined street may not generate enough charge. We’ll assess the actual weight and sun exposure before recommending solar, and if it won’t hold up, we’ll tell you and quote a wired opener instead. Your written estimate covers either route.
The HPOZ can reject it and require removal. That means paying for a second gate, another installation, and usually another round of review. We’ve seen this exact scenario on Windsor Boulevard and Larchmont. The way to avoid it is to match the period style, dimensions, and hardware from the start, which often means custom fabrication or vintage salvage. We handle that in-house and include HPOZ compliance in the written price. Call (213) 322-0062 before you order anything from a catalog.
Automatic gates in Hancock Park must meet California’s UL 325 safety standard, which includes monitored safety edges or photoelectric sensors that reverse the gate if it contacts anything while closing. On a heavy period gate, we typically install both: a monitored edge along the trailing side and photo eyes at the opening. This is standard on every automatic gate we install, and it’s part of the written estimate, not an add-on. A gate that can crush a stroller or a dog is not something we’ll leave on your property.
Yes, and it’s usually a sliding gate rather than a swing gate. A sliding gate rides parallel to the property line, so it doesn’t need the arc of clear space a swing gate needs. On narrow Hancock Park driveways, especially east of Larchmont where lots are tighter, we set a cantilever sliding gate that doesn’t even need a ground track, so leaves and debris don’t jam it. The panel can be custom-built to match your home’s style, and we’ll give you a written price for the whole job before we start.
Call Portcullis Gate Repair Los Angeles for Your Hancock Park Gate Installation
If you need a gate installed in Hancock Park, start with a call. We’ll schedule a free measure, check your post footings, confirm the HPOZ requirements for your block, and hand you a written price for the complete job. No deposit games, no door-knock surprise. Dean Prescott has run this company on that principle since 2008, and every job carries the 365-Day Done Right Promise. Call (213) 322-0062 and talk to a live person, day or night.
Written by Dean Prescott, Owner at Portcullis Gate Repair Los Angeles, serving Hancock Park since 2008.